Using the data provided in each one of these tests it can be assumed that one has done the steps to be able to determine the magnitude and orientation of the charges of the tape in each test, thus, allowing them to apply the same principle to any object they so desired. Their results would line up with the following; that if the two pieces of tape are torn from the same 40 centimeter strip then the tops of both pieces of tape would be positive and the bottoms of both pieces of tape would be negative and that if they would double the tape the attraction or repulsion in general would lower due to the increased density. Their data would also show that two pieces of tape ripped from each other would result in one piece being entirely positive and the other being entirely negative, they would also be able to state that the orientation of how the tape is paired up doesn’t matter. …show more content…
Therefore, the purpose of the lab, which was established as, to see the role that static electricity has on objects, when determining their charge and how they interact, is fulfilled in a wall mannered fashion. This process extends to other objects and real world applications, such as the controlling of electrical cable manufacturing and application in areas such as a television depot station, where static electricity must be managed and accounted for to avoid disruptions. As well as in micro surgery where small mechanical devices and robots must be carefully monitored in electron level in order to preserve machine functionality and efficiency. Therefore, the purpose of the lab is met and the hypotheses was supported, proving the quality and efficiency of the lab being
Contents TASK 1 1 1.1)TYPICAL AXIS CONVENTION 1 1.2) operations of types of drives and axis control system. 4 1.3) SIX DEGREES OF FREEDOM. 8 1.4] WORK HOLDING DEVICE FOR LATHE 8 TASK 2. 12 2.1) Assess the suitability of machine tools for the production of following components 12 2.2) SEQUENCE OF OPERATIONS TO PRODUCE THE GIVEN COMPONENT 13 2.3) MACHINING AND FORMING PROCESS 13 TASK 3
The design relied on two Schmitt triggers to generate the two different tones while using the transistors to act as a switch. This causes it to trigger continuously between two unstable states, allowing automatic switching between two frequencies producing two different tones. The RC values between the two Schmitt triggers will differ. Capacitors charge and discharge faster when it’s resistance is smaller.
The power spectral densities ($PSD$) of the gas jet centerline $C^*(t)$ for the tests in Tab.\ref{Table} were computed via $FFT$, and collected in Fig.\ref{Spectra}. For plotting purposes, the frequency domain $f_j$ is limited to $f_j=150 Hz$, and the $PSD$ in each graph is normalized with respect to the maximum $PSD$ detected within the three tests. Regardless of the stand-off distance $\hat{Z}$, for $\hat{Y}=0$ the response of the jet to the membrane motion is the superimposition of a harmonic response $f_h$ and a higher frequency $f_f$, which is not affected by the membrane motion. Noteworthy, $f_f$ scales with the standoff distance and leads to a constant Strouhal number $St_Z= f_f Z/U_j\approx 0.08$, not far from the $St_Z=0.12$ \cite{Vshape}
1.2 RESEARCH OBJECTIVES: 1.2.1 Creating Data Set The images used in this work have been obtained from the Street View service developed by Google. It provides high- resolution views from various positions along many streets and roads in the world. These images are taken at discrete geographical locations defined by a pair (LAT, LON) (latitude and longitude in decimal degrees, respectively) [19].
Figure shows the intersection of line joining the camera center and image points ${\bf x}$ and ${\bf x'}$ which will be the 3D point ${\bf X}$.\\ \end{figure} The ‘gold standard’ reconstruction algorithm minimizes the sum of squared errors between the measured and predicted image positions of the 3D point in all views in which it is visible, i.e.\\ \begin{equation} {\bf X=\textrm{arg min} \sum_{i} ||x_i-\hat{x_i}(P_i,X)||^2} \end{equation} Where ${\bf x_i}$ and ${\bf \hat{x_i}(P_i,X)}$ are the measured and predicted image positions in view $i$ under the assumption that image coordinate measurement noise is Gaussian-distributed, this approach gives the maximum likelihood solution for ${\bf X}$. Hartley and Sturm [3] describe a non-iterative
a). Based on the observation, we assume that the distance between two stations is 0.375 KM Mean time to send = propogation time + transmission time = 375m. + 1000bits 200 x 106 m/sec. 10 000 000 bps. = 102 μsec. b).
1. There are two ways of maximizing points in this experiment. The first one is that I should connect myself to a vertex that is in the biggest component and purchases immunization. Since the probability of being infected is based off of expected value, I would have less than 1% chance of getting infected. The second way is that I try to make myself stay in the second-largest connected component.
• Ensure service members’ records were filed properly and maintained in the individual record. • Procure service member records in-order to be mailed out to other claim offices, having major effects on individuals. • Ensure all regulatory requirements pertaining to individual privacy were adhered to. • Research and obtain all necessary paperwork and relevant information regarding cases and issues pertaining to individual records. • Identify records, inconsistencies and initiated actions to correct the problems.
1. Goal The objective of this lab was to create a Windows 2012 Datacenter Virtual Machine. On this virtual device, we were tasked with installing DHCP, DNS, and Active Directory services. This was very similar to lab 2 in that all of the core services had to be installed on this one device as with our RHEL7 server previously.
The difference between the two and three-tier client/server configuration, are the tiers (layers) that make up the systems. In a two-tier system you have a client and a server, each has the capability of doing the processing for the application (Brown, DeHayes, Hoffer, Martin, & Perkins, 2012). The software is loaded on the client computer, and access the data server directly. In a three-tier system, there is an additional server/computer between the client and data server; this third component contains the business logic or processing for the application (Brown, DeHayes, Hoffer, Martin, & Perkins, 2012; Luke, n.d.). A three-tier configuration could be a web-enabled business application.
There so much static electricity that it could short telephone wires, make barbed wire fences catch on fire, and literally make cars start to melt. It's like putting
Elijah Brycth B. Jarlos IX-Argon 1. Multicellularity is a condition of an organism to have multicellular cells. An example of a organism who has multicellular cells are plants, animals, and humans. The main reason of why scientists have a hard time finding a good set of existing organisms to compare. Is neither the first set of organisms which is being compared is dying as fast as the second specimen is being examined or they just can’t find the right species.
1a. What is a cell? A cell is the basic unit of life. 1b.
2.4 Band Division and Energy Computation: The power spectrum of the signal is multiplied by magnitude response of set of 33 triangular band pass filters and in the range 300Hz-2000Hz. Sub-bands are formed by using the logarithmic spacing. The positions of these filters are equally spaced along the Mel frequency, which is related to the common linear frequency f by following formula: Mel (f) = 1125* ln (1+f/700) (3) Mel frequency is proportional to the logarithm of linear frequency and which is close to the human perceptual system. 2.5 Sub Fingerprint Generation:
Prelab: In this lab report, the elements being discussed are about; the study of charging by friction, induction and conduction. The material being used to demonstrate the study in this lab are: Pith ball electroscope, ebonite rod, glass rod, wool and plastic. The lab also talk about the law of Electrostatic in the table # 1 as the procedure of charging the ebonite rod with the wool and plastic with the glass rod then looking at how the charge affect the pith ball as toward the charge ( attract or repel ). The safety concerns that are likely to occur are that the ebonite and glass rods will be tapped against other objects, causing them to break and causing an injury.