Candle Burning Experiment

Then more roasting occurred when the crucible was placed into a ceramic triangle for the Bunsen burner to continue its burning for an additional 90 minutes. Once the burning was officially over, the crucible was placed onto a ceramic tile to cool off. Next the charcoal and copper material were poured onto a paper towel and were separated from carefully distinguishing them one from the other. Then comparisons were down through analysis of the copper (II) oxide smelted.

In the first part of the experiment, Part A, the standard solutions were prepared. As a whole, the experiment was conducted by four people, however, for Part A, the group was split in two to prepare the two different solutions. Calibrations curves were created for the standard solutions of both Red 40 and Blue 1. Each solution was treated with a serial 2-fold dilution to gain different concentrations of each solution.

When the students placed the wire containing the sample in the flame it burned a orange/ red color. when this result was compared with the previous flame tests it could have resulted from either CaCl2 or NaCl. Both of these compounds produced an orange flame. After the flame test was conducted, the students performed a litmus test to identify whether the unknown was neutral or a base. When exposed to the red and blue litmus paper, no reaction occurred.

In a Beacon School, located in NYC, two-tenth - graders were seriously injured, leaving a boy with critical burns and another student with fewer server burns from her neck, head, and arm. Anna Peole, chemistry teacher was showing a “demonstration of rainbow flames” which will result burning of 4 different kinds of nitrates in separate crucibles in the classroom. However, the unstable amount of methyl alcohol hazes around the chemistry lab and explodes across the lab table surrounding Alonzo Yanes, a sophomore at the Beacon School. Alonzo Yanes was standing a few feet away from the lab table, where the crucibles were.

Characteristic Property- Test 3- Flame Test Materials: tongs, unknown 6, matches Procedure: at the sink, we held a small piece of towel that was soaked with the liquid fraction 6 and held it with the tongs for the lit match to light it on fire. Data: We found that the unknown is flammable after it automatically lit on fire and burned during the burn test.

Some compounds have very distinctive colors when burned, such as Potassium, which is a white/purple, and sodium, which is a deep red hue. The first step for a flame test is to gather the needed materials. These include beakers, distilled water, the unknown substance, a Bunsen burner, matches, a nichrome wire, tubing to connect the gas line to the Bunsen burner, goggles, and known compounds to compare with. The first step is to make aqueous solutions of all the substances to be tested. This is done by adding .5

They tested the scent alone, and mosquitoes were attracted to

Symbolism is a notable feature in Catching Fire. Through symbolism , Suzanne Collins manages to paint Katniss as the ultimate embodiment of rebellion through transferring her into a mockingjay . " A mockingjay is a creature the Capitol never intended to exist"(92), as it is a result of the Capitol's usage of the japperjays which were sent to spy on the rebels. However, the japperjays failed in their mission so the Capitol left them to die ,but they managed to survive through mating to female mockingbirds . This proves that the existence of the mockingjays is an act of rebellion in itself , an act of defiance excuted by the Capitol's own invention , long before Katniss has been born. .

In Fahrenheit 451, Ray Bradbury uses imagery to develop a sense of revolution. When Bradbury writes “He felt his smile melt away, melt, fold over and down on itself like tallow skin, like the stuff of a fantastic candle” it compares Montag’s smile to a melting candle. When an appalling realization starts to sink into someone ’s mind their smile can slowly change into a frown or another negative expression, more or less how a candle melts. Bradbury uses the image of a candle to represent Montag’s appearance because a candle will melt much slower than something like sugar in a bowl of water.

Mika Nijhawan 9/29- 10/10 2 MENTOS AND SODA LAB REPORT State the Problem Does the type of soda affect the size of the explosion, after mentos are added? Develop a Hypothesis If seven mentos to a 2L bottle of Diet Pepsi, then it will create the biggest geyser out of Coke, Fanta, & Root Beer because Diet Pepsi has potassium benzoate, aspartame, and the carbonation which react to mentos. Design an Experiment Materials List: 1 clear test tube 35 original flavored Mentos candies (2 1/2 rolls) 1 3x5 index card 4 2L bottles of soda (all different flavors/types) 1 2L bottle of soda water 1 100 mL graduated cylinder 1 400 mL beaker 1 pair of tweezers (preferably large) 1 small container Procedure: Stack seven mentos in the test tube When given permission take the test tube, soda bottles, index cards, and the remaining 25 mentos, to the designated area Place one of the four soda bottles on a flat area Open the soda bottle and place the 3x5 index card over it With the index card over the soda bottle, flip the test tube over and place it on the index card, so the test tube is lined with

Cocoanut Grove Nightclub Fire, 1942 The Cocoanut Grove nightclub fire happened on November 28, 1942. The fire would kill 492 people, while sending 166 others to hospitals around Boston. It is estimate that over 1000 people were in the nightclub the night of the fire, well surpassing the occupant load set for 460 people. The Cocoanut Grove fire is the deadliest fire to have ever occurred in a nightclub.

Chemical compounds that are available to determine are CaCO3, CaCl2, Ca(NO3)2, mgCl2, MgSO4, KCl, HCl, HC2H3O2, KNO3, K2SO4, NaC2H3O2, Na2CO3, NaCl, Na2SO4, HNO3, H2SO4, HNO3, H2SO4, NH4Cl, (NH4)2SO4, K2CO3, 0.1 M AgNO3, 0.2 M BaCl, Mg(s), NaOH, and KOH. To start this experiment, start with the flame test by gathering a Bunsen burner and a Nichrome wire. Connect the Bunsen burner with a rubber tube to a laboratory gas. To prepare solutions for the flame test, weigh out 0.205 gram of Unknown Compound using an analytical balance and mixed it into a 140 mL beaker filled with 20 mL ionized water. Ensure that solid is completely dissolved using a stirring rod.

Measurements, Calculations, and Significant Figures Measurements, calculations, and significant figures are vital mathematical terms used to understand the basic concepts of physics. Knowing how to properly make measurements and apply the necessary calculations to obtain accurate answers will surely prove beneficial in physics, but having that knowledge will also help you throughout your entire life. Therefore, it is important to understand the processes and numbers involved when using measurements, calculations, and significant figures. Measurements are used to identify the specific characteristics of an object, such as length, size, and amount. One must use the proper measuring device, depending on the conditions of the experiment and

The wax melted first, followed by the salt, and lastly the sugar. The salt not only burned before the sugar, but developed a brown color throughout most of the substance at a faster pace. In the water solubility test, the salt dissolved in the water, as soon as it was properly mixed and the sugar dissolved in the water as well, but was stirred for a longer period of time until it was completely dissolved. The wax did not dissolve in the water, however bits of the substance broke off from the main piece. With this information, the final results included: wax as a nonpolar covalent compound, since the substance melted first and was not soluble in water; salt as a polar covalent compound, since the substance was soluble in water and the second to melt; and sugar as an ionic compound because the substance melted last and was soluble in

Record the readings for the time taken, for the particular height (the paper cup was dropped from). Repeat this process (using the same equipment), by varying the height of paper cup from the ground (with a specific difference in height, in each experiment). The independent variable, which is the height the empty muffin paper cup is dropped from, will start at 1 metre and the increase in height will be 0.5 m in each experiment. The use of the clamp stand is effective in this experiment because it will always control or keep constant, the height in which the paper cup is dropped from, unlike somebody dropping the paper cup using his/her hands.